Our Location

Drop us a line!

Address

Mulk Holdings FZC
Hamriya Free Zone , Hamriya
Sharjah | UAE
Rockford, IL 61108

Phone

+971 6 5262202

Fax

+971 6 5262203

Alubond USA Titanium

Alubond USA Titanium

T_tanium

Introduction

Alubond U.S.A Titanium Composite Panel is composed of non-combustible mineral filled core sandwiched between 0.3mm thick Titanium sheet on the topside and 0.3mm thick stainless steel  in grade 304 or 316 on the bottom side.

Colors and Finishes

Alubond U.S.A offers an option for stainless steel Composite Panels (SCP) using three type of coil finishes: Brushed Hairline, Dull and High Mirror. They are designed to provide sophisticated look to exterior and interior cladding, accenting natural beauty and metal shade of stainless steel. This composite also maintains flatness, rigidity combined with light weight
and easy fabrication which are necessary features for advanced architectural and technical designs.

Maintenance

The Alubond U.S.A ACP panel is resistant to industrial atmospheres and is self-cleansing in most environments. As with all claddings, improvements in durability is achieved by an annual wash down with warm water so to avoid the buildup of deposits. The Alubond U.S.A ACP panels is anti static and more self-cleansing than many of the alternatives.

Process

Routine cleaning of the Alubond U.S.A. panel surface is recommended. It may be washed with water and mild detergent followed by a clean water rinse. The frequency of cleaning and the choice of suitable cleaning agent depends largely on the position of the building being cleaned and degree of contamination. Cleaning of sun-heated surfaces (above 400 C) is nopt recommended to avoid rapid drying which may lead to stain formation.The cleaning operation must be followed by a thorough rinse with clean water to ensure the removal of all remnants of the cleansing agent. A final wipe down by means of a sponge, leather or wiper is necessary to avoid water stains.

For further details, (please refer to the Maintenance Manual in the downloads section)

Quality

We produce Alubond U.S.A and its affiliated materials under the proper control based on ISO 9001:2000 and ISO 14001: 2004 quality assurance system from the coil coating lines to the continuous laminating lines. Our mission to deliver high quality products and services on time at the right price makes our products and services the prime choice for our stakeholders worldwide. We will achieve this through constant innovation and commitment to R & D with a highly committed work force.

 

 

  • STANDARD WIDTH: 1250mm
  • AVAILABLE WIDTH: 980 mm, 1200mm
  • STANDARD LENGTH: 3200mm, 4000mm
  • AVAILABLE LENGTH: Custom order upto 6000mm
  • AVAILABLE THICKNESS: 3mm, 4mm
  • AVAILABLE SKIN THICKNESS: 0.3mm – 0.5mm


  • WIDTH: + 2mm
  • LENGTH: + 4mm
  • THICKNESS: + 0.2mm
  • SKIN THICKNESS: As per International Standards
  • BOW: (LENGTH AND OR WIDTH) Maximum 0.5%
  • SQUARENESS: Maximum 5mm (less than/ equal to 5%)
  • BASIC ALLOYS: Ti-Zinc
  • PHYSICAL STATE: H42/H44/H46/H48 (in accordance with EN 485-2 Standard)
  • CHEMICAL PRE-TREATMENT: Ti- ZInc coil is cleaned for dust, oil, grease etc with degreasing chemicals.
    After cleaning it is treated with chrome free conversion chemical like Zirchonium to activate the surface for better adhesion and corrosion resistance.
  • PROTECTIVE FILM FEATURES: 80 micron UV treated PE Film.

Edges of sheets shall be square and trimmed with no displacement of aluminum sheets or protrusion of core material.

Alubond USA Titanium FR-B core (3 mm) – 10.5 – 12.2 kg/m2

Greater than 120 Nmm/mm (tested as manufactured and after 21 days soaking in water at 70°F)